Sonardyne
Support Centre

Trialling an independent DP position reference for GNSS-challenged waters 

As GNSS jamming and spoofing become more common in some offshore wind development areas, DP vessel operators need position references that do not depend on satellites.

A trial on a Gardline DP2 geotechnical vessel showed SPRINT-Nav DP could provide a stable, independent position reference, staying within 1 m of DGNSS over more than 12 hours of live site investigation work. 

The challenge 

Many vessels in the offshore energy sector use dynamic positioning (DP) systems to hold station and manoeuvre. These systems rely on several position references, and vessels classed as DP2 must have a minimum of three. For offshore wind site investigation vessels this is critical, because the vessel must hold station while crews carry out geotechnical drilling, sampling and survey work. 

Near existing offshore infrastructure, vessels can use laser or other relative positioning systems, with targets placed on platforms and other structures. On undeveloped sites with no structures, these are not an option and the choice narrows, typically to GNSS, USBL acoustic positioning and a taut wire. Losing GNSS in this situation would be particularly serious. 

That risk is growing. With current geopolitical instability, there are increasing reports of GNSS degradation caused by intentional jamming and spoofing. This is becoming more prevalent in some offshore renewable energy development areas, such as the eastern Baltic Sea. 

We worked with Gardline, a UK-based multidisciplinary marine survey company, to show how SPRINT-Nav DP could be retrofitted as an additional, independent position reference for DP vessels. 

Gardline operates a fleet of geophysical and geotechnical vessels. All of its geotechnical vessels are DP2-classed and are typically used for site investigation work on offshore wind developments, making one of them a suitable platform for the trial.

 

  • What: Testing SPRINT-Nav DP as an independent DP position reference during offshore wind site investigation work 
  • Where: Baltic Sea
  • Vessel: Gardline DP2 geotechnical drilling vessel
  • Water depth: 40–50 m  

The solution  

SPRINT-Nav DP is a shallow-water position reference for DP vessels. It builds on the SPRINT-Nav family’s integration of inertial navigation and acoustic technology, combining a Doppler velocity log (DVL), inertial navigation system (INS) and attitude and heading reference system (AHRS) in a single subsea sensor. Its DVL operates at 375 kHz with a maximum range of 200 m, which suits the shallow water typical of offshore wind development. 

The trial set out to monitor SPRINT-Nav DP against the vessel’s existing GNSS systems, to assess the stability and repeatability of its position solution. 

SPRINT-Nav DP was fitted using the vessel’s second retractable through-hull deployment pole. 

Mounted to protrude 2.5 m below the hull, the system was connected to a dedicated bridge computer running SPRINT software. For the trial, it was monitored independently and was not connected into the vessel DP system. 

To align SPRINT-Nav DP with the vessel reference frame, pitch, roll and heading data were logged from the vessel’s pre-installed third-party AHRS. These corrections were then applied to SPRINT-Nav DP, ensuring its position output was aligned with the vessel. 

The results 

A 2D plot showing a complex, square-like trajectory with blue and orange lines representing position and heading, respectively. Red arrows indicate reference points. Axes are relative Northing and Easting in meters.SPRINT-Nav DP performed well throughout the trial.

Its DVL maintained bottom lock for more than 12 hours with no outages, even during geotechnical operations, when thruster activity creates high levels of acoustic noise. 

Over this period, SPRINT-Nav DP stayed within 1 m of DGNSS. Its position drifted slightly during the 12-hour run but returned to the correct location.

The movement was attributed to changes in water sound velocity over the tidal cycle. 

For this trial, the vessel position calculated by SPRINT-Nav DP was sent to the survey desk for monitoring, rather than into the DP system.

The system was then left running for a further three days during similar operations, during which it deviated by approximately 1 m per 24 hours from DGNSS.

 

0

hours

0

outages

<1m

of DGNSS

Conclusion 

Trials on a working geotechnical vessel showed that SPRINT-Nav DP provided a robust, independent position reference with stability suitable for dynamic positioning operations, maintaining reliable performance during offshore site investigation work.

Duncan Rigg, Sonardyne Business Development Manager.

“For me, the project highlighted the value of working closely with customers as new technologies are proven in real operating conditions,”.

“During the trials, changing sound velocity was identified as an important factor in long-duration positioning performance, underlining the need for accurate environmental monitoring alongside the navigation sensor.”

“That learning has since been built into SPRINT-Nav DP, with onboard sound velocity calculation based on recorded temperature and salinity input.”

“This is a practical example of how customer trials help refine capability, reduce operational uncertainty and strengthen the system for future DP applications.”

“As GNSS disruption becomes a more serious consideration for offshore operations, it is important that industry works together to test and validate innovative positioning solutions in realistic working conditions,” says Dave Mann, Geomatics Manager, Gardline.

“This trial with Sonardyne was a useful opportunity to assess SPRINT-Nav DP alongside our existing systems and understand how an additional, independent reference could help Gardline maintain resilience during DP geotechnical operations.”