The Sonardyne Metrology Stab and Receptacle has been designed to allow precise installation of Sonardyne subsea positioning equipment, such as Compatt 6, on structures and other subsea equipment.
Its unique selling point is the high manufacturing tolerance combined with a pop-up tell-tale flag that provides visual confirmation the Stab is precisely docked in the Receptacle.
Using the Sonardyne Stab and Receptacle, the traditional method of rotating of a stab in a hub during metrology operations to determine stab-to-receptacle slop, can be eliminated. With this time consuming task removed, acoustic metrologies have the potential to be completed in less than six hours.
Additionally, the tolerance of the design allows for 0.1° for heading and 0.01° for pitch/roll which is the same quoted error of a calibrated GyroCompatt 6. This improves the results of the metrology or other positioning tasks and reduces the need for error determination of the stab/receptacle.
The Receptacle is designed to bolt into the eight bolt hole pattern of the industry standard 8” AWWA Class D flange. This allows the user to either bolt this flange onto the structure or to provide bolt holes in the structure itself. After dimensional control techniques to determine the relationship of the bolt holes in relation to the structure points of interest (jumper hubs, CRP, spool flanges, etc), the Receptacle can be bolted in with known offsets to these points. This allows fast and precise inferred metrology to one or multiple hubs or flanges from a single Receptacle.
The Receptacle features a 45° cone in which the Stab sits. This reduces the possibility of debris building up on the interface between the two and allows for a more precise connection due to the point of contact being exactly circular regardless of any small expansion /contraction effects.
The Stab also features an alignment bar rather than alignment pins to aid docking and provide superior heading alignment. An O-ring on the stab shaft assists in ensuring the two are precisely mated.